RH

Shopping Cart

0 item $0.00
There are 0 item(s) in your cart
Subtotal: $0.00

GO FAST BITS T9460 VTA FOR FORD FOCUS RS

$271.00

SKU: T9460

SHARE:

SKU T9460 Categories , ,

Description

T9460 VTA FOR FORD FOCUS RS

If you want sound with your performance (or performance with your sound!), GFB’s VTA delivers just that! By combining the proven performance benefits of our ground-breaking DV+ with atmosphere venting, the VTA delivers an aggressive blow-off sound, improved throttle response and boost recovery, as well as superior boost holding and reliability in extreme conditions.

The factory diverter valve found on these cars has two distinct issues – reliability, and performance. Oh yeah, it also doesn’t make any noise!

Here’s how the VTA addresses these problems.

Reliability – There are two ways in which the factory diverter valve can fail; the un-reinforced rubber diaphragm can rupture, and the metal valve stem that slides in the plastic cap can stick. In both cases, there is a risk to the turbocharger, as the ECU will attempt to compensate for a boost leak by increasing the wastegate duty cycle, which increases the turbo RPM significantly.

The VTA features CNC machined billet components that last a lifetime and cannot be damaged by high boost pressures or the associated increased charge temperatures.

Performance – The factory diverter valve typically operates in only two states – either fully open, or fully closed. When it opens at low boost, or during a partial throttle lift mid-corner, it causes increased lag and a noticeably non-linear boost transition, which is noticeable as a distinct “step” down in power as you roll off the throttle and the valve opens.

The VTA however allows the piston to open and close progressively in response to the amount of boost pressure present, so it only vents enough air to prevent compressor surge (the primary purpose of a diverter or blow off valve). This helps to smooth out boost transitions, making the throttle response more linear and predictable, and also minimizes lag introduced by the factory diverter valve.

Sound – The VTA, as its name suggests, vents the air to atmosphere for maximum “whoosh” noise when you lift off the throttle. On the Focus RS, there is no MAF sensor and hence no drivability or fuelling issues when venting to atmosphere.

Additional information

Weight 6 kg
Actuator
Add OEM Macan Brake Calipers?
Add Spark Plugs?
Application:
CHRA
Coils
Color:
Colour:
Compressor Wheel
Drivetrain
ESC Delete
Edition
Engine:
Filter Option:
Filter Type:
Filter:
Finish:
Gearbox
Glass Color
Grooves
Heat Shield Finish:
Heat Shield:
Ignition Coil Colour:
Knob Color
Option:
Pad Type:
Powder Coat Color
Rear Suspension
Select Filter Type:
Shifter Type
Side
Size:
Spark Plugs
Specs
Spring Pad Option:
Strut Diameter
Version:
With SAI?
Brands

Go Fast Bits

Compatibility

Focus (2012-2018) 2.3 Turbo

Reviews

There are no reviews yet.

Be the first to review “GO FAST BITS T9460 VTA FOR FORD FOCUS RS”

Your email address will not be published. Required fields are marked *

x